Horizontal shades of blue lines
Medical

OCXO   TCXO   SAW Filter   VCXO   STD XO   MEMS

With exciting breakthrough technologies in diagnostic imaging equipment, wireless telemetry and patient monitoring, Vectron's product portfolio is supporting the growth of Medical Industry. Our products offer superior quality and reliability as well as the industry's lowest phase noise, lowest jitter and the best stabilities in the smallest footprints. These diagnostic tools are becoming more independent on the advancements of precision oscillators and frequency generation devices. Vectron is committed to the achieving the performance needed to support the future requirements demanded by these critical applications.

Oven Controlled Crystal Oscillators (OCXO)
Show All OCXO products >>
Product Crystal
Cut
Frequency Range
(MHz)
Output Supply Aging Temperature
Stabilities to
-40°C to +85°C
Features
OX-209
OX-209 OCXO
OCXO
SC 20 to 35 Sinewave
12V
< ± 1ppb/day
< ± 50ppb/year
50ppb –115 dBc/Hz at 10 Hz offset
–175 dBc/Hz at 10 kHz offset
OX-204
OX-204 OCXO
OCXO
SC 10 Sinewave
12V
< ± 0.5ppb/day
< ± 30ppb/year
20ppb –135 dBc/Hz at 10 Hz offset
–175 dBc/Hz at 10 kHz offset
–Low power consumption:
   4 watts during warm–up
   1.5 watts during steady state
OX-400
OX-400 OCXO
OCXO
AT 10 to 160 HCMOS
3.3 & 5V
< ± 300ppb/year
< ± 2.5ppm/10years
10 ppb - Stratum 3 over the Industrial Temp Range
SC 10 to 52 HCMOS
3.3V
< ± 100ppb/year
< ± 700ppb/10years
OX-200
OX-200 OCXO
OCXO
AT 10 to 100 HCMOS/Sinewave
3.3V, 5V, or 12V
< ± 250ppb/year
< ± 2ppm/10years
10 ppb - Stratum 3 over the Industrial Temp Range
SC 10 to 100 HCMOS/Sinewave
3.3V, 5V, or 12V
< ± 100ppb/year
< ± 500ppb/10years
top of page

Temperature Compensated Crystal Oscillator - TCXOs
Show All TCXO products >>
Product Frequency Range
(MHz)
Output Supply Temperature
Stabilities to
-40°C to +85°C
Features
VT-800
VT-800 TCXO
TCXO
10 to 40 MHz CMOS
Clipped Sinewave
  - Tight Stability Reference Clocks (CMOS & Clipped Sinewave)
VT-704
VT-704 TCXO
TCXO
5 to 52 MHz CMOS
Clipped Sinewave
±1.0ppm - Tight Stability Reference Clocks (CMOS & Clipped Sinewave)
TX-508
TX-508 TCXO
TCXO
10 to 100 MHz HCMOS
LVCMOS
±25.0ppm - Low G-Sensitivity
- High shock resistant
- Vibration hardened
- Random Vibration according to MIL-STD-202G; Method 214A;
Condition II-D 0.1 g2/Hz / 30 grms
top of page

SAW Filters
Show All SAW Filter products >>
Product Center
Frequency
(MHz)
Bandwidth Pass
Band
Ripple
Insertion
Loss
Group
Delay
Ripple
Features
TFS1413
TFS1413 SAW Filters
SAW Filter
1413.25 36.50 MHz BWOP 3.8 dB 25 ns - 50 Ohm
- No Matching
- Low Loss
- Tight Transition
TFS2441A
TFS2441A SAW Filters
SAW Filter
2441.75 83.5 MHz BWOP 6.5 dB 5 ns - Wide Bandwidth
- Low Group Delay Ripple (GDR)
TFS403A
TFS403A SAW Filters
SAW Filter
403.5 3.0 MHz 1.5 dB 5.5 dB 100 ns - Small Footprint Med IF
- Great Rejection
TFS611A
TFS611A SAW Filters
SAW Filter
611 6.0 MHz 1.0 dB 6.0 dB 30 ns - 75 Ohm System
- Tight Transition
TFS433K
TFS433K SAW Filters
SAW Filter
433.42 0.15 MHz 3.0 dB 5.0 dB 700 ns - Narrow Bandwidth
- Temp Stable
- High Selectivity
TFS210C
TFS210C SAW Filters
SAW Filter
210 8.2 MHz 1.0 dB 22.0 dB 60 ns - Great Ultimate Rejection and Narrow Bandwidth
TFS210G
TFS210G SAW Filters
SAW Filter
210.82 1.6 MHz 3.0 dB 11.0 dB 240 ns - Temp Stable
- Great Rejection
top of page
Voltage Controlled Crystal Oscillator - VCXOs
Show All VCXO products >>
Product Frequency Range
(MHz)
Output Supply Features
VX-705
VX-705 VCXO
VCXO
77.76 to 170.0 CMSO / LVPECL - ±20ppm Temperature Stability
- Fundamental crystal design with low jitter performance
VV-701
VV-701 VCXO
VCXO
1.544 to 77.76 CMOS - Fundamental Crystal Design with Low Jitter Performance
- Excellent 20ppm Temperature Stability
VX-508
VX-508 VCXO
VCXO
10 to 120 HCMOS
LVCMOS
- Low G-Sensitivity
- High Shock Resistant
- Vibration Hardened - Random Vibration according to MIL-STD-202G; Method 214A;
Condition II-D 0.1 g2/Hz / 30 grms
VX-501
VX-501 VCXO
VCXO
1 to 700 HCMOS
PECL
LVDS
LVPECL
Sinewave
- FR4 based VCXO with exceptional in-close phase noise
top of page

Clocks/Crystal Oscillator - XO
Show All XO products >>
Product Frequency Range
(MHz)
Output Supply Features
VC-708
VC-820 Crystal Oscillator
XO
20 to 200 LVPECL
LVDS
- 47 fs RMS jitter typcial 12kHz–20MHz
- Ultra Low Jitter Performance, 3rd OT Crystal Design
VC-820
VC-820 Crystal Oscillator
XO
625 kHz to
133.00 MHz
CMOS - Small Size
- Fundamental Oscillator with Low Jitter Perform
- CMOS Output XO
VCC6
VCC6 Crystal Oscillator
XO
10 to 350 LVPECL
LVDS
- Reference clocks with jitter <300 fs RMS
- PECL, LVDS
PX-508
PX-508 Crystal Oscillator
XO
10 to 120 HCMOS
LVCMOS
- Low G-Sensitivity
- High shock resistant
- Vibration hardened
- Random Vibration according to MIL-STD-202G; Method 214A;
   Condition II-D 0.1 g2/Hz / 30 grms
PS-702
PS-702 Crystal Oscillator
XO
150 to 1000 LVPECL
LVDS
- Higher Frequency Reference Clocks with Jitter <100fs RMS
PX-501
PX-501 Crystal Oscillator
XO
1 to 700 HCMOS
PECL
LVDS
Sinewave
- FR4 based XO with exceptional in-close phase noise


32.768kHz Precision MEMS TCXO
(Samples not available in 48hrs, please contact factory for availability)
Oscillator
Series
Frequency Range Output Logic Package
Type
Features
MT-9560A
MT-9560 32.768kHz TCXO Real Time Clock
MEMS Oscillator
32.768kHz LVCMOS 1.5 x 0.8 x 0.6 CSP 32.768 kHz ±5, ±10, ±20 ppm frequency stability options over temp
Ultra–low power: <1 µA
Improved stability reduces system power with fewer network timekeeping updates
top of page