|
TEMPERATURE COMPENSATED (TC/VCXOs)
|
|
Series |
CO-351 |
|
Center Frequency |
to 20 MHz |
|
Deviation |
±0.01% to ±0.25%, Model Codes for ±0.01%, ±0.03%,
±0.1%, and ±0.25% are shown in the stability section below.
(for deviation exceeding ±0.25% consider a Vectron non-crystal VCO
or custom VCXO)
|
|
Control Voltage |
±5 volts (higher or lower sensitivty, or unipolar control, available);
Negative transfer function |
|
Linearity |
"N": ±5% "A": ±3% (smooth monotonic characteristic with no discontinuities)
("B": ±1%. For reference only. Option is no longer available - 6/05)
|
|
Modulation Rate |
0 to 10kHz, demodulated signal is flat to ±1dB
|
Stability (at fo)
±0.01% deviation (G) |
(Temperature Range B)
0°C to +50°C
Code Stability
GB36 ±.0003%
GB57 ±.00005% |
(Temperature Range D)
-20°C to +70°C
Code Stability
GD56 ±.0005%
GD16 ±.0001% |
(Temperature Range F)
-55°C to +85°C
Code Stability
GF25 ±.002%
GF56 ±.0005% |
±0.03% deviation (H) |
HB15 ±.001%
HB56 ±.0005% |
HD15 ±.001%
HD56 ±.0005% |
HF55 ±.005%
HF25 ±.002% |
±0.01% deviation (L) |
LB25 ±.002%
LB15 ±.001% |
LD55 ±.005%
LD25 ±.002% |
LF14 ±.01%
LF55 ±.005% |
±0.25% deviation (K) |
KB14 ±.01%
KB35 ±.003% |
KD24 ±.02%
KD14 ±.01% |
KF34 ±.03%
KF24 ±.02% |
|
Output Level/Frenquecy |
Sinewave ≥0.5Vrms/50 is standard
3.5 MHz - 20 MHz
TTL and HCMOS are available on special orders. |
|
Supply Voltage (±5%) |
+15 Vdc ± 5% standard; 12 - 24 Vdc optional,
+5 Vdc required for TTL and HCMOS |
|
Frequency Adjust |
Mechanical adjustment permits setting center frequency;
range is approximately 10% of deviation,
but no less than ±0.001% |
|
Size |
2" x 2" x 0.75"
(51 x 51 x 19 mm)
2" x 2.25" x 0.75"
for SW option |
Configuration
Options |
pins for pcb mount
"W", SMA, pins and mounting studs on base
"SW", SMA, on side, pins on base
(studs optional) |
