| 2012 |
 |
"The influence of oscillator behavior on accumulated phase error during dynamic environmental conditions,"Frequency Control Symposium (FCS), 2012 IEEE International , vol., no., pp.1–6, 21–24 May 2012
doi: 10.1109/FCS.2012.6243616Wacker, Mike F.; Matthews, Peter; |
| 2010 |
|
"Examining peculiarities of crystal oscillators using computer simulation,"Frequency Control Symposium (FCS), 2010 IEEE International , vol., no., pp.425-430, 1-4 June 2010Wacker, M.F.; |
| 2009 |
|
"The impact of tuning circuit configuration on the start-up time of crystal oscillators,"Frequency Control Symposium, 2009 Joint with the 22nd European Frequency and Time forum. IEEE International , vol., no., pp.956-961, 20-24 April 2009 doi: 10.1109/FREQ.2009.5168330Wacker, M.F.; |
| 2008 |
|
Electrically isolated thickness shear mode liquid phase sensor for high pressure environments, Andle, J.; Haskell, R.; Chap, M.; IEEE Ultrasonics Symposium |
| 2008 |
|
Quasi-2D COM model for diffraction calculation in slanted finger SAW devices, Chilla, E.; Steiner, B.; Grunwald, R.; Osetrov, A.V.; Hodkin, A.G.; Jaffer, A.; IEEE Ultrasonics Symposium |
| 2008 |
|
Acceleration sensitivity measurements of Quad Relief Mount langasite resonators, Haskell, R.B.; Buchanan, J.E.; Desai, B.B.; Stevens, D.S.; Yoonkee Kim; IEEE Frequency Control Symposium |
| 2008 |
|
Improvements in OCXO performance by the use of an on-board microprocessor, Wacker, M.F.; Villella, A.; IEEE Frequency Control Symposium |
| 2008 |
|
High sensitivity quartz cantilever gas sensors, Haskell, R.B.; Stevens, D.S.; Andle, J.C.; Chap, M.; IEEE Frequency Control Symposium |
| 2007 |
|
Obtaining Quartz Crystal Frequencies From Deterministic Temperatures and Random Angle Variations, David Chandler, Jeffrey Garstecki and Aldo Morales IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 54, No. 7, pp. 1475-1481, July 2007 |
| 2007 |
|
Design, Packaging and Characterization of a Two-Port Bulk Wave Langasite Viscometer, Andle, J.; Haskell, R.; Sbardella, R.; Morehead, G.; Chap, M.; Columbus, J.; Stevens, D.; Sensors, 2007 IEEE |
| 2004 |
 |
State-of-the-art in the design and manufacture of Low Acceleration Sensitivity Resonators. R. Haskell, J. Buchanan, P. Morley, D. Desai, M. Esmiol, M. Martin, and D. Stevens |
| 2004 |
|
Packaging Design & Manufacture of High Temperature Electronics Module for 225�C Applications utilizing Hybrid Microelectronics Technology by Jacob M. Li |
| 2003 |
|
Acoustic waves measurements on SNGS crystals and determination of material constants, Chilla, E.; Kunze, R.; Weihnacht, M.; Bohm, J.; Heimann, R.B.; Hengst, M.; Straube, U.; Ultrasonics, 2003 IEEE Symposium on |
| 2002 |
|
High Q, precision SC cut resonators with low acceleration sensitivity Technical paper by P. Morley, R. Haskell and D. Stevens |
| 2002 |
|
Method for measurement of the sensitivity of crystal resonators to repetitive stimuli Technical paper by P. Morley and R. Haskell |
| 2002 |
|
Investigation of acoustomigration effects in Al-based metallizations, Schmidt, H.; Kunze, R.; Weihnacht, M.; Menzel, S.; Ultrasonics Symposium, Proceedings. 2002 IEEE |
| 2002 |
|
Embedded inductors incorporated in the design of SAW module SMT packaging, Potter, B.R.; Mink, J.; Narayanan, V.; Ultrasonics Symposium, Proceedings. 2002 IEEE |
| 2002 |
|
Design of SPUDT filters on quartz considering waveguide modes, Steiner, B.; Martin, G.; Ultrasonics Symposium, Proceedings. 2002 IEEE |
| 2001 |
|
Transversal SAW filters using a BDT and a SPUDT, Jaffer, A.; Steiner, B.; Renger, J.; Dong-Pei Chen; Lam, C.S.; Ultrasonics Symposium, 2001 IEEE |
| 2001 |
|
Optimising slanted-finger interdigital transducer (SFIT) filters, Steiner, B.; Ultrasonics Symposium, 2001 IEEE |
| 2001 |
|
Investigation of SAW-induced acoustomigration effects in Cu- and Al-based metallizations, Schmidt, H.; Menzel, S.; Weihnacht, M.; Kunze, R.; Ultrasonics Symposium, 2001 IEEE |
| 2000 |
|
Low noise, low jitter hybrid ovenized SAW oscillators, Adler, J.V.; Clark, R.L.; Chen, D.P.; Ultrasonics Symposium, 2000 IEEE |
| 1999 |
|
Improved aging results using thick-film hybrid packaging and evacuated miniature ovenized oscillators using such packaging, Clark, R.L.; Li, J.; Adler, J.; Frequency and Time Forum, 1999 and the IEEE International Frequency Control Symposium, 1999., |
| 1999 |
|
Theoretical and experimental results for the acceleration sensitivity of rectangular crystal resonators, Stewart, J.T.; Morley, P.; Stevens, D.S.; Frequency and Time Forum, 1999 and the IEEE International Frequency Control Symposium, 1999., |
| 1998 |
|
Design optimization for acceleration sensitivity, Stewart, J.T.; Stevens, D.S.; Frequency Control Symposium, Proceedings 1998 |
| 1997 |
|
Three dimensional finite element modeling of quartz crystal strip resonators, Stewart, J.T.; Stevens, D.S.; Frequency Control Symposium, Proceedings 1997 |
| 1997 |
|
Analysis of the effects of mounting stresses on the resonant frequency of crystal resonators, Stewart, J.T.; Stevens, D.S.; Frequency Control Symposium, Proceedings 1997 |
| 1997 |
|
Finite element modeling of the effects of mounting stresses on the frequency temperature behavior of surface acoustic wave devices, Stewart, J.T.; Chen, D.P.; Ultrasonics Symposium, Proceedings, 1997 |
| 1997 |
|
Design considerations of vacuum-sealed OCXO's for HI–REL applications, Clark, R.L.; Scalpi, A.; Frequency Control Symposium, Proceedings 1996 |
