Horizontal shades of blue lines
High Shock & Vibration Product Solutions
Technical Resources
Low Phase Noise    High Stability    High Shock & Vibration    Low g-sensitivity    Extended Temp Range

When oscillators need to operate in a High Shock and Vibration environment such as in avionics, missiles, vehicles, construction equipment and industrial applications, the oscillator must be specially designed to both survive and operate in these environments. The main performance parameter that is affected from vibration is phase noise. Further details about these affects can be found in the g-sensitivity section of the website. When designing for survival in harsh environments, the designer must be concerned about both the crystal design and the oscillator design. It is a challenge to create an oscillator with state of the art performance while maintaining a small form factor. Vectron's 50+ years of designing High Shock and Vibration products has resulted is the table of products below. Vectron also has extensive experience working with our customers to create a rugged interface between our oscillator and our customer's system. As a result, Vectron has a large library of capabilities that are not depicted in this table. Please contact Vectron if you have a need for custom High Shock or Vibration requirement.

Find a solution from our portfolio that meets your High Shock & Vibration requirements

  Product Package Size (mm) Frequency Range Temp Stability
–40 to 85°C
Shock Vibration
MEMS HT-MM900A 7.0 x 5.0 x 0.90
5.0 x 3.2 x 0.75
3.2 x 2.5 x 0.75
2.5 x 2.0 x 0.75
2.0 x 1.6 x 0.75
1 to 137 MHz 25ppm
 
XO HT-RTC-XO
Real Time Clock
5 x 7
8 x 8.5
0.5 x 0.5 (inches)
32.768 kHz 25ppm
PX-420 12.7 x 12.7 x 5.08 32.768 kHz to 40 MHz 25ppm
PX-500 9 x 14 x 3.68 1 to 800 MHz 25ppm
PX-508 9 x 14 x 6.2 10 to 120 MHz 25ppm
PX-570 8 x 8.5 x 2.91 32 kHz to 40 MHz 25ppm
PX-702 5 x 7 x 1.8 32.768 kHz to 40 MHz 25ppm
 
VCXO VX-708 5 x 7 x 1.95 2 to 40 MHz 50ppm
VX-400 20.32 x 12.7 x 5.08 10 to 30 MHz 25ppm  
VX-500 9 x 14 1 to 80 MHz 25ppm  
VX-508 9 x 14 x 6.2 10 to 120 MHz 25ppm
 
TCXO TX-707 5 x 7 x 2.8 10 to 52 MHz 1.0ppm
TX-550 9.6 x 11.4 x 3.76 8 to 100 MHz 1.0ppm
TX-508 9 x 14 x 6.2 10 to 100 MHz 1.0ppm
 
OCXO / EMXO OX-080 37 x 37 x 13 8 to 15 MHz 30ppb
OX-043 52 x 52 x 20 8 to 15 MHz 5ppb
OX-046 52 x 52 x 20 50 to 250 MHz 200ppb
EX-200 23.6 x 26.2 10 to 20 MHz 30ppb  
 

top of page