Horizontal shades of blue lines
  Back to Product Table


CO-402V/442V Voltage Controlled Crystal Oscillators (VCXO)


Features:
  • 32 kHz to 75 MHz
  • TTL / HCMOS / ACMOS Compatible
  • Low Profile 14 pin DIP

Phase Locking
Applications

(32 kHz to 640 MHz
logic output)
Voltage Controlled Crystal Oscillators
 
TTL
Configuration
Low profile hybrid DIP
Series CO-402V
Center
Frequency
32 kHz-75 MHz
Supply Voltage (±5%) +5 Vdc
Deviation/Stability
Alternatives
Code Temperature
Range
Temperature
Stability
** Minimum
Deviation
0    0/+50°C ±10 ppm ±  30 ppm
A    0/+50°C ±20 ppm ±  50 ppm
B    0/+50°C ±35 ppm ±100 ppm
C*    0/+50°C ±35 ppm ±200 ppm
 
D    0/+70°C ±20 ppm ±  40 ppm
E    0/+70°C ±40ppm ±100ppm
F*    0/+70°C ±40 ppm ±200 ppm
G -20/+70°C ±30 ppm ±  60 ppm
H -20/+70°C ±40 ppm ±100 ppm
I* -20/+70°C ±40 ppm ±200 ppm
 
J -40/+85°C ±40 ppm ±  60 ppm
K -40/+85°C ±50 ppm ±100 ppm
L* -40/+85°C ±50 ppm ±200 ppm
 
M -55/+85°C ±50 ppm ±100 ppm
N* -55/+85°C ±50 ppm ±200 ppm
 
** Deviation is referenced to the specified output frequency . For example, in Model CO-401V-BX at 10 MHz, at 25°C and 0V control, the frequency is at least 100 ppm below 10 MHz and at +5V the frequency is at least 100 ppm above 10MHz.
*The following notes apply to options C,F,I,L and N (±200 ppm deviation);
  • They are available at frequencies up to 25 MHz for TTL and HCMOS and 75 MHz for ECL and Sinewave.
  • Linearity of ±10% is standard.
Control Voltage
0 to 5V; positive transfer function
(lowest frequency at 0V)
*Bipolar control optional (±3V to ±10V)
(625 kHz to 70 MHz)

*With bipolar control voltage option, transfer function is negative, linearity is ±10% and an additional +12V to +24V supply is required for ECL models.
Linearity ±20% (±10% optional); ± 10% is standard with bipolar control voltage and with deviation/stability options C, F, I, L, and N.
Mechanical
Tuning Options
N/A
Size
0.5" x 0.8" x 0.2"
(12.7 x 20.3 x 5.1 mm)
CO-442V: 14 pin
top of page
Phase Locking
Applications

(32 kHz to 640 MHz
logic output)
Voltage Controlled Crystal Oscillators
 
HCMOS/ACMOS
Configuration
Low profile hybrid dip
Series
CO-442V
Center
Frequency
64 kHz - 75 MHz
Supply Voltage (±5%)
+5 Vdc
Deviation/Stability
Alternatives
Code Temperature
Range
Temperature
Stability
** Minimum
Deviation
0    0/+50°C ±10 ppm ±  30 ppm
A    0/+50°C ±20 ppm ±  50 ppm
B    0/+50°C ±35 ppm ±100 ppm
C*    0/+50°C ±35 ppm ±200 ppm
 
D    0/+70°C ±20 ppm ±  40 ppm
E    0/+70°C ±40ppm ±100ppm
F*    0/+70°C ±40 ppm ±200 ppm
G -20/+70°C ±30 ppm ±  60 ppm
H -20/+70°C ±40 ppm ±100 ppm
I* -20/+70°C ±40 ppm ±200 ppm
 
J -40/+85°C ±40 ppm ±  60 ppm
K -40/+85°C ±50 ppm ±100 ppm
L* -40/+85°C ±50 ppm ±200 ppm
 
M -55/+85°C ±50 ppm ±100 ppm
N* -55/+85°C ±50 ppm ±200 ppm
 
** Deviation is referenced to the specified output frequency . For example, in Model CO-401V-BX at 10 MHz, at 25°C and 0V control, the frequency is at least 100 ppm below 10 MHz and at +5V the frequency is at least 100 ppm above 10MHz.
*The following notes apply to options C,F,I,L and N (±200 ppm deviation);
  • They are available at frequencies up to 25 MHz for TTL and HCMOS and 75 MHz for ECL and Sinewave.
  • Linearity of ±10% is standard.
Control Voltage
0 to 5V; positive transfer function
(lowest frequency at 0V)
*Bipolar control optional (±3V to ±10V)

*With bipolar control voltage option, transfer function is negative, linearity is ±10% and an additional +12V to +24V supply is required for ECL models.
Linearity ±20% (±10% optional); ± 10% is standard with bipolar control voltage and with deviation/stability options C, F, I, L, and N.
Mechanical
Tuning Options
N/A
Size
0.5" x 0.8" x 0.2"
(12.7 x 20.3 x 5.1 mm)
CO-442V: 14 pin
top of page
CO-402V/442V

Dimension in inches
 
Pinouts
Pin
1
7
8
14
Function
VCXO
0V, Case
Output
+ 5 Vdc
top of page