Horizontal shades of blue lines
Test & Measurement

OCXO  EMXO  Modules  TCXO  Frequency Translation  VCSO  SAW Filter  VCXO  STD XO  Crystals

Test and Measurement applications typically place demanding requirements on components as measurement accuracy and precision continue to increase. In addition, decreased size and increased instrumentation portability drives the need for smaller more energy efficient components. Vectron is helping ensure that our customers meet these demands with industry leading phase noise, jitter and stability while continuing our legacy of innovation by offering smaller footprints and lower power consumption in our award winning products.

Oven Controlled Crystal Oscillators (OCXO)
Show All OCXO products >>
Product Frequency Range
(MHz)
Output Supply Aging Temperature
Stabilities to
-40°C to +85°C
Features
OX-407
OX-407 OCXO
OCXO
10 to 50 CMOS/Sinewave
3.3 or 5.V
< ± 5ppb/day
< ± 500ppb/year
100ppb –g-sensitivity as low as 0.07ppb/g
–150dBc/Hz at 100 kHz offset
OX-209
OX-209 OCXO
OCXO
20 to 35 Sinewave
12V
< ± 1ppb/day
< ± 50ppb/year
50ppb –115 dBc/Hz at 10 Hz offset
–175 dBc/Hz at 10 kHz offset
OX-204
OX-204 OCXO
OCXO
10 Sinewave
12V
< ± 0.5ppb/day
< ± 30ppb/year
20ppb –135 dBc/Hz at 10 Hz offset
–175 dBc/Hz at 10 kHz offset
–Low power consumption:
   4 watts during warm−up
   1.5 watts during steady state
OX-206
OX-206 OCXO
OCXO
10 or 20 HCMOS
Sinewave
3.3V, 5V
< ± 1ppb/day
< ± 100ppb/year
10ppb - Temp Stability: ±10ppb at −40 to 95°C
- 25 x 25 x 13.2mm Through hole and surface mount package available
OX-400
OX-400 OCXO
OCXO
10 to 52 HCMOS
3.3 & 5V
< ± 100ppb/year
< ± 700ppb/10years
10ppb - TCXO Replacement
- Small Size
- Fast Warm-up
OX-200
OX-200 OCXO
OCXO
10 to 100 HCMOS/Sinewave
3.3V, 5V, or 12V
< ± 100ppb/year
< ± 500ppb/10years
10ppb - 1"x1" Low Profile
- Excellent Stability vs Cost
- Low Aging
- Phase noise floor of -165dBc/Hz
OX-221
OX-221 OCXO
OCXO
10 to 32.72 CMOS
3.3V
< ± 0.5ppb/day
< ± 60ppb/years
3ppb –122 dBc/Hz at 10 Hz offset
–154 dBc/Hz at 10 kHz offset
–Low power consumption:
   4 watts during warm–up
   1.35 watts during steady state
OX-170
OX-170 OCXO
OCXO
5 to 40 HCMOS/Sinewave
3.3V, 5V, or 12V
< ± 50ppb/year
< ± 500ppb/10years
5ppb - Eurocase
- Fast Warm-up
- Low Aging
- Both AT & SC Cut Xtals
DX-040
DX-040 OCXO
OCXO
4 to 15 HCMOS/Sinewave
12V
< ± 10ppb/year
< ± 100ppb/10years
0.2ppb - Ultra High Stability
- Excellent Temp Stability
- SC Cut Xtals
OX-041
OX-041 OCXO
OCXO
5 to 20 HCMOS/Sinewave
12 or 15V
< ± 50ppb/year
< ± 500ppb/10years
10ppb - Low Phase Noise
- High Stability
top of page

Evacuated Miniature Crystal Oscillators - EMXOs
Show All EMXO products >>
Product Frequency Range
(MHz)
Output Supply Aging Temperature
Stabilities to
-40°C to +85°C
Features
EX-421
EX-4210 EMXO EX-4211 EMXO
EMXO
10, 20 or 100 HCMOS
Sinewave
3.3 or 5.0V
< ± 100ppb/year 30ppb - Low Power Consumption: 0.25W steady state vs. 1.5W steady state OCXO
- Fast Warm−up: 60sec vs. 5min of conventional OCXO; ±100ppb of final frequency
- Small Form Factor: 13mm x 13mm x 10mm, SMD or thru–hole
EX-200
EX-200 EMXO
EMXO
10 to 40 HCMOS
Sinewave
3.3 or 5.0V
< ± 1 ppm / 10 years 50ppb - Low Power
- small size
- fast warm-up time
- rad tolerant to 100 krad
EX-400/401/405
EX-400/405 EMXO
EMXO
10 to 80 HCMOS/LVDS/PECL/
Sinewave
3.3 or 5V
< ± 100ppb/year
< ± 1ppm/10years
50ppb - Small Size
- Fast Warm-up
- Low Power
- Excelent Stability
top of page
Modules
Show All Module products >>
Product Features
MD-023
MD-023 Timing Modules
Module
- 1PPS Input Standard (10Mhz Optional)
- 1pps and 10MHz output signals standard
- Embedded SC Cut OCXO
- Serial communications interface standard
MD-010
MD-010 Timing Modules
Module
- 1PPS Input Standard (10Mhz Optional)
- 1pps and 10MHz output signals standard
- Embedded SC Cut OCXO
- Serial communications interface standard
top of page

Temperature Compensated Crystal Oscillator - TCXOs
Show All TCXO products >>
Product Frequency Range
(MHz)
Output Supply Temperature
Stabilities to
-40°C to +85°C
Features
VT-704
VT-704 TCXO
TCXO
5 to 52 Clipped Sine
CMOS
±1.0ppm - Tight Stability Reference Clocks (CMOS & Clipped Sinewave)
TX-508
TX-508 TCXO
TCXO
10 to 100 MHz HCMOS
LVCMOS
±25ppm - Low G-Sensitivity
- High shock resistant
- Vibration hardened
- Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms
top of page

Frequency Translation / Clock & Data Recovery / Jitter Attenuation
Show All FX/CD/CS products >>
Product Input Logic # of
Inputs
Input Freq.
(min/max)
Output Freq.
(min/max)
Output Logic # of
Outputs
Features
CD-700
CD-700 Synchronous Ethernet Solution
FX CS CDR
CMOS, TTL
3.3V or 5V
1 8kHz/78MHz 100kHz/78MHz LVPECL
LVDS
Single
Frequency
2 - Smallest Analog PLL, Low Jitter
top of page

Voltage Controlled SAW Oscillator - VCSOs
Show All VCSO products >>
Product Frequency Range
(MHz)
Output Supply Features
VS-504
VS-504 VCSO Photo
VCSO
800 - 2500 Sinewave, Balanced Sinewave
Dual Frequency
Typical Jitter: 12fsec rms, 12kHz to 20MHz
3.3 V Supply Voltage
VS-705
VS-705 VCSO
VCSO
120 - 985 LVPECL, LVDS
Single Frequency
- Discrete PLL's with Jitter Performance less than 120fs rms jitter
VS-709
VS-709 VCSO Photo
VCSO
150 - 1000 LVPECL, LVDS
Dual Frequency
- 5th Generation ASIC Technology for Ultra Low Jitter
- 120 fs–rms (fN = 622.08 MHz, 12 kHz to 20 MHz)
- 105 fs–rms (fN = 622.08 MHz, 50 kHz to 80 MHz)

SAW Filters
Product Center
Frequency
(MHz)
Bandwidth Pass
Band
Ripple
Insertion
Loss
Group
Delay
Ripple
Features
TFS800A
TFS800A SAW Filters
SAW Filter
800 12.0 MHz 1.0 dB 3.0 dB 20 ns - Low Loss
- Great Rejection
- High Power Durability

Voltage Controlled Crystal Oscillator - VCXOs
Product Frequency Range
(MHz)
Output Supply Features
VX-705
VX-705 VCXO
VCXO
77.76 to 170 CMOS
LVPECL
- Fundamental Crystal Design with Low Jitter Performance
- Excellent ±20 ppm Temperature Stability
VV-701
VV-701 VCXO
VCXO
1.544 to 77.76 CMOS - Fundamental Crystal Design with Low Jitter Performance
- Excellent 20ppm Temperature Stability
VX-508
VX-508 VCXO
VCXO
10 to 120 HCMOS
LVCMOS
- Low G-Sensitivity
- High shock resistant
- Vibration hardened
- Random Vibration according to MIL-STD-202G; Method 214A;
   Condition II-D 0.1 g2/Hz / 30 grms
VX-402
VX-402 VCXO
VCXO
800 to 3000 Clipped Sinewave
balanced
- Typical Jitter: 109fsec rms, 12kHz to 20MHz
VX-501
VX-501 VCXO
VCXO
1 to 700 HCMOS
PECL
LVDS
LVPECL
Sinewave
- FR4 VCXO with good in close phase noise

Clocks/Crystal Oscillator - XO
Product Frequency Range
(MHz)
Output Supply Features
VC-708
VC-708 Crystal Oscillator
XO
20 to 200 LVPECL
LVDS
- 47 fs RMS jitter typcial 12kHz-20MHz
- Ultra Low Jitter Performance, 3rd OT Crystal Design
VC-820
VC-820 Crystal Oscillator
XO
625 kHz to
133.00 MHz
CMOS - Small Size
- Fundamental Oscillator with Low Jitter Perform
- CMOS Output XO
VCC6
VCC6 Crystal Oscillator
XO
10 to 350 LVPECL
LVDS
- Reference clocks with jitter <300 fs RMS
- PECL, LVDS
VC-801
VC-801 Crystal Oscillator
XO
1.544 to 125 TTL
CMOS
- Reference clocks with jitter <250 fs RMS
VCC1
VCC1 Crystal Oscillator
XO
1.544 to 190 TTL
CMOS
- Reference clocks with jitter <250 fs RMS
PX-508
PX-508 Crystal Oscillator
XO
10 to 120 HCMOS
LVCMOS
- Low G-Sensitivity
- High shock resistant
- Vibration hardened
- Random Vibration according to MIL-STD-202G; Method 214A;
   Condition II-D 0.1 g2/Hz / 30 grms
PS-702
PS-702 Crystal Oscillator
XO
150 to 1000 LVPECL
LVDS
- Higher Frequency Reference Clocks with Jitter <100fs RMS
Standard Crystals - XTAL
Product Frequency Range (MHz) Features
VXM4
VXM4 Crystal
Crystal
13 to 50 - Ultra Miniature Surface Mount Crystal